Polycom IP 650 - Manual (Page 31)

Customizing Your SoundPoint IP 650 SIP Phone
2 - 11
5. Enter first and/or last name of the contact from the keypad.
Use the 1/A/a soft key to select between numeric and upper/lower case
alphanumeric modes.
Use the Encoding soft key to access special characters in other languages.
6. Enter a contact number.
This is a required field and it must be unique (not already in the directory).
7. Change the Speed Dial Index if desired.
It is automatically assigned to the next available index value.
For more information, refer to
Assigning Speed Dial Keys on page 3-17 .
8. Change the Ring Type and Divert Contact if desired.
These fields may be left blank.
For more information on setting the Ring Type field, refer to
Distinguishing Calls on page 2-15 .
For more information on diverting contacts, refer to Diverting Calls on
page 2-16 .
9. Change the Auto Reject, Auto Divert, Watch Buddy, and Block Buddy if
desired.
Use
and to switch between Enabled and Disabled settings.
For more information on setting the Auto Reject field, refer to Rejecting
Calls on page 2-16 .
10. Press the Save or Cancel soft keys to accept or cancel changes.