beautypg.com

Rear panel – Peavey CM2204 User Manual

Page 14

background image

1

Rear Panel

10

12

11

0dB

-6

-

0dB

-6

-

0dB

-6

-

0dB

-6

-

www.crestaudio.com

Crest Audio, Inc.

Fair Lawn, NJ USA

Designed and manufactured in the USA by:

Outputs

Class 2 Wiring

Inputs

Gain

Ch 4

0dB

x40

Gain

Ch 3

0dB

x40

HPF

Gain

Ch 2

0dB

x40

Gain

Ch 1

0dB

x40

HPF

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, THIS APPARATUS SHOULD NOT BE EXPOSED TO RAIN OR

MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,

SHOULD NOT BE PLACED ON THIS APPARATUS.

AVIS:

DANS LE BUT DE REDUIRE LES RISQUES D’INCENDIE OU

DE DECHARGE ELECTRIQUE, CET APPREIL NE DOIT PAS ETRE

EXPOSE A LA PLUIE OU A L’HUMIDITE ET AUCUN OBJET REMPLI

DE LIQUIDE, TEL QU’UN VASE, NE DOIT ETRE POSE SUR CELUI-CI.

AVIS:

RISQUE DE CHOC ÉLECTRIQUE-NE PAS OUVRIR

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

MOUNT IN RACK ONLY.

INSTALLER SUR SUPPORT DE MONTAGE SEULEMENT.

220 Watts @ 70.7 V

220 Watts @ 8 Ohms

160 Watts @ 4 Ohms

Output Power per Channel

+

Ch

1

+

Ch

2

+

Ch

3

+

Ch

4

10

11

12

(11) Stepped Attenuators

Each channel input features a 21-position stepped attenuator ranging from
negative infinity to 0 dB. The “halfway” position of the stepped attenuator is
-6 dB, as indicated on the unit.

(12) Gain Select

An individual Gain Select is available on each channel input. This two-
position switch can be set at 0 dB in the bottom position and x40 in the
top position.

(13) Circuit Breaker

If the circuit breaker pops, turn the unit OFF and let sit for one minute and
then turn back ON. If the circuit breaker pops a second time, the unit may
be damaged and should be returned to a Crest Audio dealer for servicing.

(10) High-Pass Filter

This two-position switch provides enabling or bypass of a high-pass filter,
which is available on each channel input. In the top position (enabled), the
high-pass filter cutoff is 70 Hz. In the bottom position (disabled), the input
frequency range is extended down to 1 Hz. The top and bottom positions
of the high-pass filter are indicated on the unit by a sloped line and a flat
line, respectively.

This manual is related to the following products: