Peavey CM2204 User Manual
Page 12
7
Rear Panel
(7) AC Mains Power Receptacle
This is a standard IEC power connector. An AC mains cord having the
appropriate AC plug and ratings for the intended operating voltage is
included in the carton. The mains cord should be connected to the amplifier
before connecting to a suitable AC outlet.
AC Mains Cord
The mains cord supplied with the unit is a heavy duty‚ three conductor-type
with a conventional 120 VAC plug (230 VAC European) with ground pin.
Never break off the ground pin on any equipment. It is provided for your
safety. If the outlet used does not have a ground pin‚ a suitable grounding
adapter should be used and the third wire should be properly grounded.
NOTE FOR UK ONLY:
If the colors of the wires in the mains lead of this unit do not correspond
with the colored markings identifying terminals in your plug, proceed as
follows: (1) The wire that is colored green and yellow must be connected to
the terminal marked by the letter E, or by the earth symbol, or colored green
or green and yellow. (2) The wire that is colored blue must be connected to
the terminal that is marked with the letter N, or colored black. () The wire
that is colored brown must be connected to the terminal that is marked with
the letter L or colored red.
(8) Channel Outputs
The outputs are two-pin Phoenix connectors. Connect the loudspeaker sys-
tem to the respective positive (+) and ground (-) terminals as indicated on
the unit. An exception is when the unit is in Bridged Mode, whereupon a
speaker is connected to two positive terminals on the outputs of two chan-
nels.
12
0dB
-6
-
0dB
-6
-
0dB
-6
-
0dB
-6
-
www.crestaudio.com
Crest Audio, Inc.
Fair Lawn, NJ USA
Designed and manufactured in the USA by:
Outputs
Class 2 Wiring
Inputs
Gain
Ch 4
0dB
x40
Gain
Ch 3
0dB
x40
HPF
Gain
Ch 2
0dB
x40
Gain
Ch 1
0dB
x40
HPF
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, THIS APPARATUS SHOULD NOT BE EXPOSED TO RAIN OR
MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHOULD NOT BE PLACED ON THIS APPARATUS.
AVIS:
DANS LE BUT DE REDUIRE LES RISQUES D’INCENDIE OU
DE DECHARGE ELECTRIQUE, CET APPREIL NE DOIT PAS ETRE
EXPOSE A LA PLUIE OU A L’HUMIDITE ET AUCUN OBJET REMPLI
DE LIQUIDE, TEL QU’UN VASE, NE DOIT ETRE POSE SUR CELUI-CI.
AVIS:
RISQUE DE CHOC ÉLECTRIQUE-NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MOUNT IN RACK ONLY.
INSTALLER SUR SUPPORT DE MONTAGE SEULEMENT.
220 Watts @ 70.7 V
220 Watts @ 8 Ohms
160 Watts @ 4 Ohms
Output Power per Channel
+
Ch
1
+
Ch
2
+
Ch
3
+
Ch
4
7
8
8