Connect the meter cable to the postage meter – Pitney Bowes N921 User Manual
Page 9
Page 9
Installation Instructions
N500/600/700
series install
10.Plug power supply unit into outlet
Plug the power supply unit
into the wall outlet and turn
power on. After a short
power-up sequence, the
display appears as shown.
Note: If the scale does not power-up, check that the power cable is firmly attached to
the scale. Also check that the wall outlet you are using has power by plugging in
another device.
9. Connect the meter cable to the postage meter
If using a postage meter, connect the
large end of the meter cable to the the
meter as shown. Tighten the
thumbscrews securely.
If your postage meter is fitted with an
optional Datalink unit, connect the
large end of the meter cable to the
lower connector on the Datalink unit.
Tighten the thumbscrews securely.
B900
Datalink
B700
B900
DM series