Premier Mounts Clevis Mount CTM-MS3 User Manual

Page 9

CTM-MS3

Installation Manual

Page - 9 -

Securing the Mounting Brackets

Dimples

The Griplate™ have M4, M5 M6 and M8 hole patterns to fit the hardware that
your flat panel requires.

EXAMPLE:

If your plasma uses M8 x 20 Phillip screws, use the M8

mounting

points.

The upper Griplate™ must be mounted with the
dimples facing up. The lower Griplate™must be
mounted with the flat side facing up.

Do not over tighten the mounting hardware.

Phillips Head Screwdriver

DIMPLES
FACING UP

DIMPLES
FACING DOWN

DIMPLES

FACING DOWN

Step 1. Pre-install two (2) M6 x 30 (mm) Phillip pan screws to the bottom

of the left and right hand side mounting brackets.

Step 2. Once the mounting brackets are aligned secure the Griplate™ to the
flat

panel.