PMI - Phoenix BIGSOUND P5 - Manual (Page 15)

Technical Specifications
Length – 2.00 in; 50.80 mm
Width – 0.875 in (7/8”); 22.225 mm
Height – 0.4375 in (7/16”); 11.1125 mm
Max Volts at Track – 30V.
Power Consumption – Varies with volume; can go as high as 1000mA if
at max volume; typical is less than 100mA - medium volume.
Amplifier – 6 Watts maximum.
Speaker Load – 4 Ohms or greater; two 8 Ohm speakers in parallel is
fine.
Access Jack Diagram
T
HE PLUG IS A STANDARD
2.5
MM STEREO
(TRS)
PLUG
. T
HE SUPPLIED JACK IS FULLY
INSULATED FROM THE MOUNTING HOLE
. O
THER
2.5
MM JACKS MAY BE SUBSTITUTED
-
BUT MAKE SURE THAT THERE IS NO GROUND PATH BETWEEN THE COMMON TO ANY OF
THE POWER INPUTS
(C1:1,2
OR
6).
February 2009
- 15 -