Peavey CA-A800B - Manual (Page 4)

(1) SPS COMPRESSION ACTIVE LED
These indicators, one per channel, illuminate when SPS compression is taking place. This LED
becomes a CLIP indicator when the rear panel SPS ENABLE/DEFEAT switch is in the DEFEAT
position.
(2) POWER LED
This indicator illuminates when AC mains power is applied to the amplifier and both channels are
operational. The power LED will go dark if AC mains power is disconnected, if either channel
experiences a fault condition, or if the amplifier exceeds the safe operating temperature limits.
(3) MAINS POWER SWITCH
The mains power switch is a heavy-duty, rocker-type switch. Selecting the ÒOÓ position turns the
power amplifier off. Selecting the ÒIÓ position turns the power amplifier on.
Cinem coustics POWER
SPS ACTIVE A SPS ACTIVE B POWER ON
CA - A800B
CINEMA POWER AMPLIFIER
FRONT PANEL CA-A800B
1 2 3 1
4