Peavey CA-A800B User Manual
Page 24
24
Characteristics: CA-A540B
CA-A800B
Output Power 1, 2, 3:
2 Channel Mode, Stereo
4 ohms, 1 kHz at 1% THD
450 W RMS per channel
700 W RMS per channel
8 ohms, 1 kHz at 1% THD
270 W RMS per channel
400 W RMS per channel
Bridge Mode, Mono
8 ohms, 1 kHz at 1% THD
900 W RMS
1400 W RMS
Rated Output Power 1, 2:
4 ohms, 20 Hz to 20 kHz, 0.15% THD
400 W RMS per chan
625 W RMS per channel
8 ohms, 20 Hz to 20 kHz, 0.1% THD
240 W RMS per chan
370 W RMS per channel
Slew Rate 3:
Stereo Mode, each channel
20 volts per uSec.
20 volts per uSec.
Bridge Mode, mono
40 volts per uSec.
40 volts per uSec.
Total Harmonic Distortion 2, 3:
20 Hz to 20 kHz at rated output, 8 ohms
Less than 0.07%
Less than 0.07%
Input Sensitivity and Impedance 4:
At rated output power, 8 ohms
1.0 V RMS, 0 dBV
1.4 V RMS, +3 dBV
Balanced inputs
6.8k ohms per leg
6.8k ohms per leg
Overall system gain per channel
32.5 dB
32.5 dB
Frequency Response 2, 3:
±1dB, 1 W RMS, 8 ohms
10 Hz to 40 kHz
10 Hz to 40 kHz
±0.2 dB, at rated output, 8 ohms
20 Hz to 20 kHz
20 Hz to 20 kHz
Damping Factor 2, 3:
8 ohms, 1 kHz
Greater than 300
Greater than 300
Hum and Noise 1, 2:
Below rated output power, 8 ohms
100 dB, unweighted
100 dB, unweighted
Power Consumption 2:
At rated output power, 8 ohms
10.3 A at 100 VAC
15.2 A at 100 VAC
8.6 A at 120 VAC
12.7 A at 120 VAC
4.3 A at 220 VAC
6.4 A at 220 VAC
Cooling System:
Two-speed fan
Two-speed fan
SPS Compression System:
Switchable with LED
Switchable with LED
Dimensions and Weight:
Height:
5.25" (13.3 cm)
7" (17.8 cm)
Width:
19" (48.3 cm)
19" (48.3 cm)
Depth:
15" (38.1 cm)
15" (38.1 cm)
Weight:
45 lbs. (20.5 kg)
55 lbs. (25.0 kg)
Notes:
(1) @ 120 VAC, 60 Hz (2) Stereo mode, both channels driven (3) Typical value (4) Input attenuator set FCW
CA-A540B
ª
and CA-A800B
ª
SPECIFICATIONS