Peripheral Electronics IPOD PGHSB1 - Manual (Page 8)

6
Tune Up
Press and release the SEEK ▲ button to manually tune up. For navigation radios, turn
the TUNE KNOB clockwise.
Seek Up
Press and hold the SEEK ▲ button to seek up to the next available station. In the
Tribeca you must press the SEEK ▲ button twice.
Tune Down
Press and release the SEEK ▼ button to manually tune down. For navigation radios,
turn the TUNE KNOB counter-clockwise.
Seek Down
Press and hold the SEEK ▼ button to seek down to the next available station. In the
Tribeca you must press the SEEK ▼ button twice.
Changing Bands
Press the SAT button repeatedly (Must press SAT button & then use the “Band” icon on
navigation radios) to cycle through FM1, FM2, FM3 and AM1.
Storing Radio Stations into Preset Memory
Once you have tuned to a station you wish to store as a Preset, press and hold one
of the Preset buttons (1-6) for longer than two seconds to store the Preset into that
location. The screen will display “PR SAVED” and your PRESET has been stored into
memory.
Recall Stored Preset Stations
Press the Preset Button (1-6) that represents the station stored in memory that you
wish to recall.
Displaying Text
Press the “TEXT” button to switch between the song title information and the play
counter.
**Not all stations broadcast the artist and song title information.
*** NOTE: If the selected station supports HD Radio and the signal is strong enough the
radio will auto-lock onto the HD Radio Station. The letters “HD1, HD2 or HD3” will follow
the stations frequency when locked onto an HD station. The HD Radio will pick up both
Digital and Analog radio signals. Multicast HD2 and
HD3 stations are digital only, and will not be available if the radio signal is too far away,
causing a weak signal.
Steering Wheel Controls
Press the ▲ or ▼ button on the steering wheel to manually tune up or down.