Polaroid P751 - Manual (Page 14)

P75i
User's Manual
General Info.
Getting Started
Operation
Printing a Card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
6
ETHERNET
INDICATORS
ETHERNET
PUSH BUTTON
The following shows the function of the switch and indicators found
on P75i Printers that use Ethernet Computer Interfaces.
Press the Ethernet Push button with the printer ON to to get a Test
Card.
Press and hold the Ethernet Push button while turning ON the
Printer to perform a RESET.
LED Action Status Being Signaled
Red Flashing Power-On Self Testing
Red Solid > 30 sec Failure of Power-On Tests
Red/Green Flashing Alternately Firmware Download mode
Green Solid > 30 sec Proper Hardware Operation; Network Found
Green Rapid Flashing (9/sec) Network not Found
Green Slowly Flashing (1/sec) Print Job in Progress
Ethernet Test Card
LEDs
Ethernet Push
Button
You can refer to the ZebraNet® PrintServer II™ for Ethernet
Networks Installation and Operattion Guide for details regarding
this interface,