Philips 14PV340/05 - Manual (Page 8)

Manual TV channel search
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’ Installation ’ with the P rB or
AP q button and confirm with the SqC button.
c Select the line ’ Manual store ’ with the P rB or
AP q button and confirm with the SqC button.
MANUAL STORE
Channel/Frequency FREQU.
Search 125
Fine tuning (,,,,,,n=,,,,,,$
Name edit xxx
Programme number 01
Decoder ON
ã Exit:
« press MENU
d In the line ’ Channel/Frequency ’, select the
display for:
’
FREQU. ’: frequency
’ C CH ’: channel
’ S CH ’: special channel
e If you know the frequency or channel of the desired TV
channel, you can enter the data in line ’
Search ’ with
the digit buttons 0-9 .
D If you don’t know the frequency or channel of the TV
channel of your choice, press the SqC button to
start the channel search.
f In the line ’ Programme number ’ select the
programme number you want e.g.: ’ P01 ’, using the
DSr or SqC button.
g If you want to change the TV channel name, press the
SqC button in line ’ Name edit ’.
E Select the letter or number you want to change with the
DSr or the SqC button. Change it with the
P rB or the AP q button. Select the next letter or
number in the same way.
To store, press the
OK button.
h If you want to change the automatic tv channel setting,
select the line ’
Fine tuning ’.
With the DSr or SqC button you can vary the
automatic tv channel setting. Important: This re-tuning is
only necessary and useful in special cases, e.g.: when
there are stripes on the picture with cable-TV systems.
i Press the OK button to store the TV channel.
D If you want to search for further TV channels, start
again at step e .
j To end, press the MENU button.
6