Philips 14PV340/05 - Manual (Page 3)

Front of the set
8 Power switch : To switch off the set
Beware: When you switch the set off with the power switch, TIMER-recordings are not possible!
m Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER)
P p Programme number : To select programme number up or down
Sp Volume: To regulate the volume
ON/OFF Radio: To switch on the radio and to switch between radio- and TV-mode
H Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
I Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward scanning
5 Record: To record the programme selected
G Playback : To play a recorded cassette
? Pause/Stop, eject cassette: To stop the tape and during STOP eject the cassette
AUDIO Audio input socket
VIDEO Video input socket : To connect a camcorder or videogames
w Headphones socket: To connect headphones
Back of the set
EXT.1 Scart socket: To connect a satellite receiver, decoder, video recorder, etc.
2 Aerial input socket: To connect the aerial cable
The display at the front of the machine
In the display the time, the radio frequency or the radio programme number will be shown.
Also, these lights may light up in the display:
n Recording light: Will light up when a recording is being made
ALARM n Radio alarm: Will light up when the radio alarm is activated
nBUZZER Buzzer alarm: Will light up when the buzzer alarm is activated
k Timer light: Will light up when a Timer recording has been programmed; will flash when a Timer
recording cannot start