Pride Mobility Mini Crosser - Manual (Page 28)

28 www.pridemobility.com Mini Crosser
V I I . C O M F O R T A D J U S T M E N T S
TILLER HEIGHT ADJUSTMENT
The height if the tiller can be adjusted about 4-inches up
or down to allow for a more comfortable driving position.
1. Remove the rubber plug from the front of the tiller.
See figure 19.
2. Insert a 4 mm hex key into the opening and loosen
the hex head screw.
3. Adjust the tiller up or down by pulling or pushing the
hand grips.
4. Tighten the hex head screw and reinstall the rubber
plug.
TILLER ANGLE ADJUSTMENT
Your PMV is equipped with a pivoting tiller that allows
adjustment to several positions from its lowest position to
the farthest forward stop.
1. Pull down on the tiller adjustment lever. See figure 20.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever to secure the tiller
in position.
TILLER ADJUSTMENT
LEVER
Figure 20. Tiller Angle Adjustment
#
Figure 19. Tiller Height Adjustment
HEX HEAD
SCREW
RUBBER
PLUG