Philips 6900LC - Manual (Page 15)

ENGLISH
15
C
10 Brush the slots of the comb.
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Philips Norelco Shaving Head Cleaning Spray,
model HQ110 or alcohol). This helps prevent wear
of the shaving heads.
C
11 Replace the cutter and comb into the
Razor Head Assembly.
12 Repeat the process for the other two sets
of cutters and combs.
13 Replace the frame.
C
14 Turn the wheel clockwise until it locks into
place.
C
15 Replace the Razor Head Assembly back on
razor.
16 Put the protective razor head cap on the
razor to protect heads.
After Each Use: Trimmer (model 6940LC
only)
1 Turn razor to OFF (O) position.
C
2 Push trimmer slide switch up to pop up
trimmer.
15
1
2
09_6940LC_6900LC.indd 15 8/12/09 10:00:38 AM