Philips 6900LC User Manual
Page 14

14
ENGLISH
C
2
Press the Razor Head Release Button (
1)
and remove Razor Head Assembly from
the razor unit (
2).
C
3
Brush the inside of the razor housing.
4
Turn Razor Head Assembly over so that
underside is exposed.
C
5
Turn wheel of frame counterclockwise.
6
Remove the frame and brush clean.
C
7
Remove and clean one cutter and comb at
a time.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
8
Separate the cutter from the comb.
C
9
Only brush the cutter in an upward motion.
Use the short bristled side of the brush.
09_6940LC_6900LC.indd 14
8/12/09 10:00:36 AM
This manual is related to the following products: