Planar LC1200R - Manual (Page 19)

LC1200R User’s Guide 021-0183-00 Rev A 19 of 29
6.2.2 Max Bright Jumper
The photodiode board can be removed from the system. When the photodiode board is
unplugged the LC1200R will default to the minimum brightness mode. If the user would
like to display to run at maximum brightness, the MAX BRIGHT, JP1, jumper must be inserted
on the inverter board. See Figure 8
Figure Figure Figure Figure 7 7 7 7
Install jumper to flip
Install jumper to
Mirror
Figure Figure Figure Figure 8 8 8 8
Insert Jumper for
Max Brightness