Philips WACS700 - Manual (Page 42)

42
English
Reset
6
Select your desired language: English, French,
Spanish, Dutch, Italian and German
➜
The set enters Installation Mode
➜ The search for Center or Stations starts. The
Wi-Fi connection is being re-established
If the Center is reset and Stations are
not reset:
●
On the Stations, select AUX mode
and enter Installation Mode by:
a. Press MENU.
b. Use the navigation controls 3 or 4 and 2 to
select Installation Mode
➜ The Stations start to connect Center
If a Station is reset and the Center is
not:
● On the Center, select HD mode and then, enter
Installation Mode by:
a. Press MENU
b. Use the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. In Station Mgnt menu, use the
navigation controls 3 or 4 and 2 to select
Add New Station
➜
Searching for Stations starts
Reset
If desired, you can restore your Center or
Stations to their default setting (including the
network setting).
1
Check the set is switched on (See Basic
functions, Switching on/to standby and
selecting functions, Switching to Eco
power/ on)
2
Press MENU to enter the MENU screen
3
Use the navigation controls 3 or 4 and 2
to enter Settings
4
Use the navigation controls 3 or 4 and 2
to enter Restore settings
5
Press 3 or 4 and 2 to select Yes
➜ The set is rebooted. Language selection
screen appears
If both Center and Stations are reset:
● Do as you did in the first-time Wi-Fi connection
(see Installation, Set up Wi-Fi connection
between Center and Station)
7
On Center, press STOP Çto exit Installation
Mode when all the Stations are found
p001-p048_WACS700_EngNEW2 9/16/2005, 09:49 42