Pacific Digital MF-810 User Manual

Page 64

Page 61

If an error occurs in the above process (either erase, loading,

or verification), the MemoryFrame will display the following message:

“REDO FLASH- DON’T POWER OFF ( error code number)”

Caution! Important! Do not unplug or cut power to the
MemoryFrame or PC. The above error message indicates that there
was an error (either erase, loading, or verification) during the
firmware update. The firmware update MUST BE retried, and the
PICTURE FRAME MUST NOT BE POWERED OFF BEFORE
THAT during the upgrade process! A loss of power could erase both
old and new operating systems, leaving the MemoryFrame
inoperable.

If no errors occur, then once the new firmware update file has been
loaded into the MemoryFrame’s storage memory, the
MemoryFrame will indicate it is done by displaying the following
message indicating when you can reset the MemoryFrame:

“PLEASE POWER THE MEMORYFRAME OFF/ON”

Only then can you turn the MemoryFrame OFF, then turn it back
ON. When the MemoryFrame goes into normal operation, the
upgrade has been completed. The new Firmware revision will be
displayed in the lower right hand corner of the MemoryFrame’s
power-up initialization screen.

Enjoy the new firmware!