ProForm Recoil PFCCSY2926.1 - Manual (Page 7)

7
2. Attach the Upright Base (5) to the Base (2) with
four M10 x 76mm Button Bolts (65) and four M10
Nylon Locknuts (56).
3. Identify the Left Upright (6) and the Right Upright
(7) by the “L” and “R” stickers. Attach the two
Uprights and the Rear Frame (10) to the Upright
Base (5) with two M10 x 81mm Button Bolts (68)
and two M10 Nylon Locknuts (56).
Make sure
that the Button Bolts are inserted through the
indicated holes. Do not tighten the Nylon
Locknuts yet.
5
2
2
65
56
65
56
7
6
10
68
3
68
56
5