Philips Signal Mirror CRV 1997-2003 - Manual (Page 6)

Mirror Replacement
While using sturdy gloves, insert a small pry bar
underneath the mirror at the bottom edge of the
mirror housing. Lift up on the bottom of the mirror
to release it from the snaps. Pivot the mirror upward on its top edge and lift the
mirror out of the mirror housing. Carefully remove the foam insulation from the
mirror housing sail.
NOTE: In order to make room for the Signal ®
mirror optics about 1/4" of the left edge of the
mirror mount will need to be removed. Use a
pair of side cutters and begin cutting at the left
edge of the mirror mount, starting in the upper
left corner. Continued removal of any mirror mount
surface (interfering with Signal
® mirror optic) may
be necessary.
Continue cutting down alongside the left edge of the
mirror mount and discard the excess molding. Carefully peel back the plastic screw covers on the
bottom of the mirror bracket. Remove the three
screws that hold the mirror bracket in place.
1 2 3
4 5 6
1997-2003 Honda CRV
- 3 -