Ringer setting, Programmable settings, Ringer tone – Panasonic KX-TG2346 User Manual
Page 18
![background image](/manuals/172679/18/background.png)
Programmable Settings
18
Base unit ringer volume
Make sure the base unit is not being used.
To set the ringer volume to high (preset), medium, or low,
press VOLUME [<] or [>].
• To increase volume, press VOLUME [>].
To decrease volume, press VOLUME
[<].
• To stop ringing, press [STOP].
To turn the ringer off, press and hold VOLUME [<] until 2 beeps sound.
• “
O
” is displayed.
To turn the ringer on, press VOLUME [<] or [>].
• The base unit will ring at the low level.
• You can adjust the ringer volume while an outside call is ringing.
Press VOLUME [<] or [>] while the base unit is ringing.
To turn the ringer off, press and hold VOLUME [<] until 2 beeps sound. “
O
” is
displayed.
Ringer Tone
You can set the handset and base unit ringers to use one of 7 ringer patterns for
outside calls. “Tone 1” to “Tone 3” are bell ringer patterns. “Melody 1” to “Melody 4”
are preset melody patterns. The factory preset is “Tone 1”.
• You cannot change the ringer tone for intercom calls.
• If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your
telephone company with 2 or 3 consecutive rings, select a bell ringer pattern
(Tone 1 to 3). If you select a melody pattern, you will not be able to distinguish
lines by their ringers.
• If you select one of the melody ringer patterns, the ringer will continue to sound for
several seconds if:
— the caller hangs up before you answer the call, or
— another person answers the call using another phone connected on the same
line.
Handset ringer tone
1
Press [MENU].
2
Scroll to “Ringer setting” by pressing [d]
or [B], then press Select.
3
Scroll to “Ringer tone” by pressing [d] or
[B], then press Select.
4
Select the desired ringer tone by pressing [d]
or [B].
• The handset will ring and the ringer tone will
change. If the ringer volume has been turned off,
the handset will not ring (p. 17).
• You can also select the ringer tone by pressing [1]
to [7].
Base Unit
Handset
Ringer setting
Back
Select
K
dB
L
Ringer tone
Back
Select
K
dB
L
Ringer tone
1:Tone 1
Back
Save
K
dB
L
PQQX13987YA.book 18 ページ 2004年2月5日 木曜日 午前9時3分