Swi-ps, Step 6, Step 7 – PAC SWI-PS User Manual

Page 3: Step 8, Step 9, Step 10, Step 5, Version number

06-14-07

SWI-PS

Programming the SWI-PS to Work With the Vehicle

Step 6.

Press and hold programming/

mode button on SWI-PS. Turn the

vehicle ignition to the ON position.

The LED on the

SWI-PS will light.

Step 7.

Release the programming/

mode button.

The LED will turn off,

indicating memory is

cleared.

Step 8.

Press and release the program-

ming/mode button the same

number of times as the desired

version number.

The LED will flash

each time the button is

pressed and released.

Step 9.

After seconds, the

LED will flash the same

amount of times of set

version number.

Step 10.

Turn vehicle ignition

to OFF position.

Vehicle programming

sequence is complete.

SWI-PS

OFF

ACC

IGN

STRT

OFF

ACC

IGN

STRT

SWI-PS

Step 5.

Refer to

The Vehicle Appication Guide. Note the INTERFACE Version Number next to the selected vehicle. Fill in the information

below for quick reference.

Version Number:

____________

(Write Version Number here)

SWI-PS