Parkside XQ600 - Manual (Page 9)

11 GB
To switch off intermittent operation mode:
j Release the On / Off switch 2 .
Switching on for sustained operation:
j Press the On / Off switch 2 and, at the same
time, secure it with the locking button 3 .
Switching off after sustained operation:
j Press the On / Off switch 2 and then release it.
Rotation preselection:
j Select the desired rotation with the adjusting
wheel rotation speed selector 5 .
DUo-STaRT function / Reduced idling
rotation speed:
The appliance is fitted with a reducer for the rotation
speed when idling.The full motor performance resp.
the preselected rotation speed becomes available with
the additional activation of a DUO-START switch.
j Activate either the Front switch DUO- START 10 or
the Hand switch DUO- START 1 (see Figs. A, B, C).
This makes possible a gentler touch down onto the
work piece.
Note: The front switch DUO- START 10 springs back
into the starting position on being released.
Q
Dust suction
WaRNING! FIRE HazaRD! A risk of fire
exists when working with electrical appliances that
have a dust collection box or can be connected to
an external collection unit via a dust suction adapt-
er! Under unfavourable conditions, such as flying
sparks, grinding of metal or metal remnants in
wood, the wood dust in the dust sack (or in the dust
sack of a vacuum cleaner) can ignite.This can hap-
pen especially if the wood dust has paint particles on
it or is mixed with other chemical substances and
the material being sanded is hot after extensive
working. You should therefore avoid an overheat-
ing of the items being sanded, as well of as the ap-
pliance itself, and always empty the dust collection
box or the dust bag of the suction unit before work
pauses.
Wear a dust protection mask!
WaRNING! Before carrying out work on the
appliance, always remove the plug from the power
socket.
Installing the suction ring:
The suction ring
7 makes possible an optimal dust
suction.
j Place the suction ring 7 in the housing guide.
Close the clamp bracket on the housing rear side.
Dust suction with the dust collection box:
j Slide the dust collection box 4 onto the adap-
tor opening on the appliance rear side.
Emptying the dust collection box:
j Press the release buttons 6 on both sides,
then remove the dust collection box 4 from
the appliance.
Note: To maintain an optimal suction perform-
ance, empty the dust collection box
4 regularly.
adapter for external suction (Fig. D)
Connection:
j Slide the adaptor for external suction 11 exactly
and completely onto the adapter opening on the
appliance rear side.
j Slide the tube of an authorised dust collection
unit (e.g. a workshop vacuum cleaner) onto the
adaptor for external suction
11
Removal:
j Remove the tube of the dust collection unit from
the adaptor for external suction 11
j Press both release buttons and remove the
adaptor for external dust collection 11 from
the appliance.
Commissioning