beautypg.com

2600 specifications – Peavey GPS Series User Manual

Page 17

background image

17

GPS

2600 SPECIFICATIONS

Rated Power (2 x 2 ohms)

- 1,300 watts @ 1 kHz both channels driven at <0.15% T.H.D.

Rated Power (2 x 4 ohms)

- 950 watts @ 1 kHz both channels driven at <0.1% T.H.D.

Rated Power (2 x 8 ohms)

- 650 watts @ 1 kHz both channels driven at <0.1% T.H.D.

Rated Power (1 x 2 ohms)

- 1,500 watts @ 1 kHz at <0.1% T.H.D

Rated Power (1 x 4 ohms)

- 1,000 watts @ 1 kHz at <0.1% T.H.D

Rated Power (1 x 8 ohms)

- 700 watts @ 1 kHz at <0.05% T.H.D

Minimum Load Impedance

- 2 ohms

Maximum RMS Voltage Swing

- 93 volts

Frequency Response

- 10 Hz - 100 kHz; +0, -.3 dB at 1 watt

Power Bandwidth

- 10 Hz - 40 kHz; +0, -3 dB at rated power

T.H.D. (2 x 2 ohms)

- <0.15% @ 1050 watts from 20 Hz to 20 kHz with both channels driven

T.H.D. (2 x 4 ohms)

- <0.1% @ 900 watts from 20 Hz to 20 kHz with both channels driven

T.H.D. (2 x 8 ohms)

- <0.1% @ 600 watts from 20 Hz to 20 kHz with both channels driven

Input CMRR

- > - 65d B @ 1 kHz

Voltage Gain

- x 40 (32 dB)

Crosstalk

- > -75 dB @ 1 kHz at rated power @ 8 ohms

Hum and Noise

- > -110 dB, “A” weighted referenced to rated power @ 8 ohms

Power Consumption

- > 1200 watts

Slew Rate

- > 40V/us

Damping Factor (8 ohms)

- > 700:1 @ 20 Hz to 1 kHz

SMPTE IMD

- <0.1% 60 Hz and 7 kHz, 900W @ 4 ohms

Input Sensitivity (x 40)

- 1.54 volts for 4 ohm rated power, 1.27 volts for 2 ohm rated power

Input Impedance

- 20 k ohms, balanced

Current Draw @ 1/8 power@ 2 ohms

- 10 A @ 120 volts

Cooling

- Two 80 mm DC fans, off until heatsinks reach 45

0

C, then temperature dependant

variable speed

Controls

- Two front panel attenuators

Indicator LEDs

- Two Clip, two Signal, two Active

Protection

- Thermal, DC, turn-on bursts, subsonic, incorrect loads

Connectors

- XLR input, 6.3 mm phone type output patch, Speakon and Binding Post speaker

output, IEC mains input

Construction

- 16 ga. steel reinforced with 12 ga.rack ears

Dimensions

- 133 mm x 483 mm x 432 mm, 400 mm behind rear mounting ears

(5.23" x 19" x 17", 15.75" behind rack ears)

Weight

- 45.7 lbs. (20.7 kg)

Specifications subject to change without notice.