Paxar Monarch 9401 - Manual (Page 27)

6. Press
6
. You’ll see the last selection, for example
SCANNER
Scanner Type >
7. Press
2
until you see
SCANNER
Auto Enter >
8. Press
6
. You’ll see the last selection, for example
AUTO ENTER
< Yes
The options for Auto Enter are
Yes At data entry, the printer displays the prompt for the
next field immediately after a successful scan.
No At data entry, the operator must press
6
after
scanning the data. Then the printer displays a
prompt for the next field.
9. Press
1
or
2
to display the option you want, then
press
6
. You’ll see
SCANNER
< Auto Enter
10. Press
8
twice if you want to return to the Setup menu.
Setting Up the Scanner
5