Panasonic DMC-FZ18 - Manual (Page 70)

Advanced (Recording pictures)
70
VQT1F83
w Setting the travel destination area
(Perform steps
1
,
2
and
3
.)
Press
to select [DESTINATION] and
then press [MENU/SET] to set.
Depending on the setting, the time at
the travel destination area or the home
area is displayed.
• If you are setting the travel destination
area for the first time, the date and time
are displayed as shown in the screen
above.
Press
/ to select the area the travel
destination is in and then press
[MENU/SET] to set.
• The current time at the selected travel
destination area is displayed on the top
right of the screen and the time
difference from the home area is
displayed at the bottom left of the
screen.
• If daylight saving time [ ] is used at
the travel destination, press
. (The
time advances by one hour.) Press
again to return to the original time.
Press [MENU/SET] to close the menu.
• The icon changes from [ ] to [ ]
after setting the travel destination.
• Return the setting to [HOME] when the
vacation is finished by performing steps
1
,
2
,
3
and then steps and of
“Setting the home area [HOME]”. (P69)
• If you cannot find the travel destination in
the areas displayed on the screen, set by
the time difference from the home area.
• The travel destination icon [ ] appears
when playing back pictures taken at the
travel destination.
MENU
SET
MENU
SET
MENU
SET