Polycom SpectraLink 8000 - Manual (Page 26)

SpectraLink 8000 SVP Server: Administration Guide for SRP
PN: 1725-36032-001_G.doc 26
that the administrator cannot change this option. It is automatically
set by the system. Reset the system at exit to clear
Maintenance Lock .
Inactivity Timeout (min)
Set the number of minutes the administrative module can be left
unattended before the system closes it. This number can be from 1 to
100. If it is set to zero (0), the administrative module will not close due
to inactivity.
QoS Configuration
DSCP Tag
(Differentiated Services Code Point) is a QoS mechanism for setting
relative priorities. Packets are tagged with a DSCP field in the IP
header for type of service. The decimal value may be set as a number
from 0-63 and may be different for each traffic class listed on the
screen.
Administration tags set the priority for telnet, TFTP, and other
administrative traffic. Administrative traffic can have the lowest
priority because it does not require voice quality.
WT (In call) traffic requires voice quality and may be set to a higher
priority than WT ( Standby ) traffic.