Polaroid DVP 300 - Manual (Page 29)

- 28 -
Troubleshooting
SYMPTOM CHECK ITEM
The player will not play
or displays “NO DISC”.
-If disc is loaded in.
-If disc is loaded upside down.
-If disc is dirty or warped.
-If the players region code is the same as the
region code of DVD disc.
-If water condensation has occurred.
-If it occurs, take out disc and leave the
player on for at least one hour.
There is no sound.
-If system connection is correct.
-If the power to speakers is turned on.
-If the sound setup of DVD disc is correct.
-If disc is dirty or warped.
-If it occurs, clean it or press it.
There is no picture.
-If TV is turned on and is in correct video
mode.
-If system connection is correct.
Picture move up and
down. Unsteady. -If the signal system is correct.
Cannot continue to play
and play a section
repeatedly.
-If it is in A-B repeat status.
-If it is true, press A-B button to cancel it.
-If disc is dirty or damaged.
-If it is true, clean it or skip the section.
The remote control does
not work.
-If there are obstructions between the remote
control and the player.
-If you are pointing the remote control at the
player.
-If batteries are inserted or the polarity is
correct.
-If batteries are weak.
-If it is true, replace them.
Others:
Static or other external interfere may cause the abnormity of the player.
In this circumstance, unplug the power-supply cord from the outlet. Wait 10
seconds and plug it in again to reset the player so that the normal operation
will be resumed. If you are still having problems, then please disconnect the