Pioneer Plasma Display Panel PDP-425CMX - Manual (Page 11)

11
RS-232C Adjustment
Command Function
Number direct Last
Effective Minimum Maximum memory
SCREEN MASK
FMKS00 Sets SCREEN MASK to OFF.
FMKS02 Sets SCREEN MASK to inverse (negative – positive reversed).
FMKS03 Sets SCREEN MASK to white mask.
FMKS04 Sets SCREEN MASK to red mask.
FMKS05 Sets SCREEN MASK to green mask.
FMKS06 Sets SCREEN MASK to blue mask.
FMKS07 Sets SCREEN MASK to yellow mask.
SIDE MASK
RSL Adjusts side mask RED. 000 255
GSL Adjusts side mask GREEN. 000 255
BSL Adjusts side mask BLUE. 000 255
VIDEO WALL
MGFS00 Sets VIDEO WALL to OFF.
MGFS11 Sets VIDEO WALL to DIVIDER:1.
MGFS12 Sets VIDEO WALL to DIVIDER:4.
MGFS13 Sets VIDEO WALL to DIVIDER:9.
MGFS14 Sets VIDEO WALL to DIVIDER:16.
MGFS15 Sets VIDEO WALL to DIVIDER:25.
MGPSnn nn=01 to 04: Sets display position during DIVIDER=4 (not accounting for joints).
nn=05 to 08: Sets display position during DIVIDER=4 (accounting for joints).
nn=10 to 18: Sets display position during DIVIDER=9 (not accounting for joints).
nn=20 to 28: Sets display position during DIVIDER=9 (accounting for joints).
nn=30 to 3F: Sets display position during DIVIDER=16 (not accounting for joints).
nn=40 to 4F: Sets display position during DIVIDER=16 (accounting for joints).
nn=50 to 68: Sets display position during DIVIDER=25 (not accounting for joints).
nn=70 to 88: Sets display position during DIVIDER=25 (accounting for joints).
IDA Executes AUTO ID setting.
PDES00 Sets POWER ON DELAY mode to OFF.
PDES01 Sets POWER ON DELAY mode to ON (other than cases used for a higher than
16 screen system) or mode 1(used for a higher than 16 screen system).
PDES02 Sets POWER ON DELAY mode 2 (used for a higher than 16 screen system).
LNKS00 Sets ABL link to OFF.
LNKS01 Sets ABL link to ON.
RS-232C
BRAS01 Sets the RS-232C baud rate to 1200 bps.
BRAS02 Sets the RS-232C baud rate to 2400 bps.
BRAS03 Sets the RS-232C baud rate to 4800 bps.
BRAS04 Sets the RS-232C baud rate to 9600 bps.
BRAS05 Sets the RS-232C baud rate to 19200 bps.
BRAS06 Sets the RS-232C baud rate to 38400 bps.
ID NUMBER
IDC Clears the ID number.
IDS Sets the ID number.
FAN
FCM Maximizes fan rotation control.
FCA Automates fan rotation control.
OSD
OSDS00 Sets OSD display to OFF.
OSDS01 Sets OSD display to ON.
OSSS01 Displays expanded OSD.
OSSS02 Displays contracted OSD.
OSAS01 Sets the OSD display angle to horizontal.
OSAS02 Sets the OSD display angle to vertical.
7 “INTEGRATOR”–“OPTION” related commands