Philips AZ5160 - Manual (Page 13)

13
English
AZ 5160/98
page
13
CD/VCD/MP3-CD
Up to 20 tracks can be stored in the memory in any order.
For CD/VCD only
1. In stop mode, press PROG (or ProG on remote control) to enter programme setting.
™ PROG will flash on the display.
2. Press digits 0 - 9 or ¡ / ™ on the remote control (or
∞ / § on the set) to select the desired
track.
3. Press PROG to store the select track. The number “
PXX“ indicates a programme sequence.“XXX”
indicates the track number.
™ PROG will remain on the display.
• Repeat steps 2 to 3 to store other tracks.
4. Press
9 to end programme setting.
• Press PROG (or ProG on remote control) in stop mode to review the programme sequence.
5. Press 2; to play the programmed tracks.
• If you press REPEAT on the set or Rep/RepAll on the remote control during programme playback,
the current track or all programmed tracks will be played repeatedly.
™ REPEAT/REPEAT ALL icon and PROG will appear on the display.
6. Press 9 in stop mode to clear the programme.
™ PROG will disappear from the display.
Notes : -The programming is automatically cleared as soon as the CD compartment is opened.
- The function of programme setting is disabled in PLAY/PAUSE mode.
For MP3-CD only
1. In stop mode, press PROG on the set (or ProG on the remote control) to enter programme setting.
™ PROG will start flashing.
™ On TV screen, "PROG" program list (5 lines per page) will be displayed.
2. Press digits 0 - 9 on the remote control or AL+ / - to select the desired album.
3. Press PROG to store the selected album. The number “
AXX” represents the album number.
4. Press
∞ / § repeatedly on the set (or digits 0 - 9 or
¡ / ™ on the remote control) to select the
desired TRACK for programming.
5. Press PROG to store the selected track.
™ PROG will remain flashing on the display.
• Repeat steps 2 to 5 to store other desired album and track.
6. Press
9 to end programme setting.
• To review programme, press PROG repeatedly in stop mode.
™ PXX indicates a programme sequence. AXX indicates an album number. XXX indicates a
track number.
7. Press 2; to start programme playback. You can press ∞ / § (or ¡ / ™ on the remote control)
to select the programmed track to play.
8. Press 9 once to stop programme playback, or twice to clear the programme.
PROGRAMMING TRACKS