Philips AZ5160 - Manual (Page 12)

12
English
AZ 5160/98
page
12
CD/VCD/MP3-CD
™ On TV screen, the album list is displayed (max. 10 lines per page). The current selected music
is highlighted.
Notes : - To ensure good system performance, wait until the disc completely reads before
proceeding.
- For MP3-CD, the disc reading time may exceed 1 minute due to the large number of
songs compiled into one disc.
1. Press 2; to start playback.
™ The track number of the current track and 2 appear on the
display.
• To interrupt playback, press 2;.
™ 2 will disappear and the current track number will start flashing.
• To resume playback, press
2; again.
2. To stop playback, press 9.
To select a desired track
• Press ∞ or § on the set repeatedly (or use digits 0 - 9 buttons or ¡ / ™ on the remote control)
until the desired track appears on the display.
• If playback is stopped, press 2; to start playback.
To search for a particular passage during playback
1. Press and hold ∞ or § on the set.
™ During searching, the volume will be muted.
2. When you recognize the passage you want, release the
∞ or § button.
™ Normal playback resumes.
For MP3-CD only
To select a desired album
• On the remote control, press AL+ or AL- until the desired album number appears on the display.
™ " AXX" will be displayed.
™ On TV screen, the selected album will be highlighted.
To select a desired track
• Press ∞ or § on the set repeatedly (or ¡ / ™ on the remote control) to select a desired track
from the current album.
™ "
XXX" will be displayed.
™ On TV screen, the selected track will be highlighted.
• Use the digital keys on the remote control to select the track under current album directly.
To select and playback another track during playback mode
1. Press ∞ or § repeatedly to select another track.
™ The new selected track will show on the display screen and TV screen and playback
continuously.
For VCD only
• Either press
5
or
6
on the remote control repeatedly to select fast search speed (x1, x2, x3 or x4)
or
press & hold ∞ or § on the set for 1 second and then release ∞ or § to select fast search
speed (x1). Repeat this step to select other speed (x2, x3, x4).
SELECTING A DESIRED TRACK/PASSAGE
VCD
MP3
L R
PLAYING A NORMAL DISC