Philips CID3687/00 - Manual (Page 5)

English
Connect wires 1
1
Check the car’s wirings carefully, then
connect them to the unit.
Mount in the dashboard
2
1
If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
2
Ensure that the horizontal slant of the car
dashboard opening is between 0 and 20
degrees. The unit cannot be used if the
dashboard opening’s slant angle is above 20
degrees.
3
Fix the four plastic buckles (supplied by
the car manufacturer for the original audio
system) to the unit.
a
4
Fix the mounting brackets to the unit with
screws (supplied by the car manufacturer). b
5
Slide the unit into the dashboard and fi x it
to the car with four screws. c
6
Reconnect the negative terminal of the car
battery.
Turn on
1
Press and hold /MUTE/VOL to turn on
the unit.
The available OSD (On-Screen Display) »
languages are displayed.
2
Tap a language to select.
To turn off the unit, press and hold • /
MUTE/VOL .
Set date and time
1
Tap to display main menu.
2
Tap in the middle right side of the screen.
3
Tap [Settings] .
4
Tap [Time] .
Set date
1
Tap [Date] .
2
Tap on the displayed date information.
3
Tap or to set year, month and day.
Set clock mode
1
Tap [Clock mode] .
2
Tap on [12Hr] or [24Hr] to select clock
mode.
Set time
1
Tap [Time] .
2
Tap on the displayed time.
3
Tap or to set hour and minute.