Panasonic Versio EB-TX320 - Manual (Page 24)

Chapter 2
14 Getting Started
Setting Ring Volume
You can adjust the volume of your phone’s ring. (See “Alert Mode” on
page 44 for more information about using your phone in special situations
such as meetings and theaters.)
1
From standby, press (MENU) to enter the Main Menu.
2 Scroll to Tone Settings and press (OK).
3 Press (OK) to select Ring Volume.
• The display shows the current ring volume setting.
4 Press to increase ring volume, or to decrease volume.
• A sample of the current ring tone is emitted and the display indicates the
current ring volume setting.
• If you select the lowest setting, the ring volume is muted (silent).
5 When you reach an acceptable ring volume, press (OK).
Note: When the volume is set to muted (silent), the icon is
displayed.
Selecting a Ring Alert
You have the option of selecting from several different ring alerts.
1 From standby, press (MENU) to enter the Main Menu.
2 Scroll to Tone Settings and press (OK).
3 Scroll to Ring Alert and press (OK).
4 Scroll to the ring alert type you want to select and press (OK).
• If you select General Rings, you can choose from six different rings. As
you scroll through the rings, you can hear the ring associated with each
ring number. When you hear the ring you want, press
(OK).
• If you select Preset Melody, you can choose from ten melodies. As you
scroll through the list, the melodies are played. When you hear the
melody you want, press
(OK).
Note: When selecting a new ring alert, you will not be able to
hear the sample ring or melody if ring volume has been muted or
if you are in a conversation.
Vibration Alert
In addition to alerting you with a ring, your phone can alert you to incoming
calls by vibrating. This feature is useful for when you are in a meeting, at
the movies, or at a concert, when an audible ring might be disturbing to
others.
To ensure that you do not disturb anyone, you should also mute
the ring volume of your phone (see “Setting Ring Volume” on
page 14).
1 From standby, press (MENU) to enter the Main Menu.
2 Scroll to Tone Settings and press (OK).