Pioneer S-DV525 - Manual (Page 55)

Initial Settings menu 11
55
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 11
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1 Press HOME MENU and select ‘Initial
Settings’.
2 Use the cursor buttons and ENTER to
select the setting and option you want to
set.
All the settings and options are explained on
the following pages.
Note
• In the table below, the default setting is
shown in bold : other settings are shown in
italics .
• Some settings, such as TV Screen , Audio
Language and Subtitle Language may be
overridden by the DVD disc. Often these
settings can also be made from the DVD
disc menu.
• European model only – The AV Connector
Out setting only needs to be set if you have
connected this player to your TV using a
SCART cable (See
Using the SCART AV
output on page 62).
Video Output settings
Initial Settings
Setting Option What it means
TV Screen
(See also Screen sizes
and disc formats on
page 77.)
4:3 (Letter Box) Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
4:3 (Pan & Scan) Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
16:9 (Wide) Set if you have a widescreen TV.
AV Connector Out
European model only
(See also Using the
SCART AV output on
page 62.)
Video Standard video, compatible with all TVs.
S-Video Higher quality, but check your TV for compatibility.
RGB Best quality, but check your TV for compatibility.
XV-DV525.book 55 ページ ２００４年２月１８日 水曜日 午後２時２９分