Pioneer S-DV525 - Manual (Page 20)

Getting started 03
20
En
Home theater sound setup
After setting up your front speakers as shown
below, refer to the supplied setup guide, or
Using the wireless speaker system on page 27
for more wireless speaker placement options.
• Standard surround setup – This is a
standard multichannel surround sound
speaker setup.
The following speaker placement options are
only possible
if you have connected a pair of
speakers (not supplied) to the surround
speaker terminals (refer to the setup guide to
do this) and you are using the the wireless
speaker as a second stereo system (see
Using
the wireless speaker system on page 27 for
more on this).
• Standard surround 5-spot setup –
Provides enveloping surround sound by
using additional surround speakers.
• Front surround 3-spot setup – See Using
Front Surround on page 31 for more on this.
Using the Room Setup
After you have set up your speakers to your
liking (see
Home theater sound setup above),
make sure you calibrate your system for
surround sound. This is a quick and easy way
to get good surround sound for your room.
For a more detailed surround sound setup, see
Using the System Setup menu on page 50.
1 If the system isn’t already on, press
STANDBY/ON to switch it on.
2 Press ROOM SETUP.
• If you have previously set up the room type
and seating position, the display will show
the current room settings.
3 Press ENTER.
4 Use the / (cursor up/down) buttons
to select a room type then press ENTER.
Choose one of the following:
• S – Smaller than average room
• M – Average room
• L – Larger than average room
5 Use the / (cursor up/down) buttons
to select a seating position. Press ENTER.
Choose one of the following depending on
where your main listening position is:
• Fwd – If you are nearer to the front
speakers than the surround speakers
• Mid – If you are equal distance from the
front and surround speakers
• Back – If you are nearer to the surround
speakers than the front speakers
Note
• The Room Setup automatically sets up
both channel level and channel delay. If
you have already set the channel levels
manually (see
Setting the channel levels on
page 52), you will see Room Set? in the
display when you first press the ROOM
SETUP button.
Front left
Listening position
Wireless speaker
Center
Subwoofer
Front right
Front left
Surround
left
Listening position
Center
Subwoofer
Front right
Surround
right
Front
left Front
right Surround
left
(not supplied)
Surround
right
(not supplied)
Listening position
Center
Subwoofer
XV-DV525.book 20 ページ ２００４年２月１８日 水曜日 午後２時２９分