Paxar Four Station Charger 6094 - Manual (Page 11)

Wall Mount Installation
To install the charger, you will need hardware appropriate for
•
the wall surface.
•
the weight of the charger with 4 handles
(approximately 9.8 lb/4.4 kg).
•
screws no larger than No. 10 wood screw.
1. Select a location within 6 feet of an electrical outlet. Use
the bracket of the charger to mark the holes where the unit
is to hang.
2. Attach the necessary hardware to the wall.
3. Place the bracket of the charger over the hardware and let
it slide down.
4. Plug the female end of the power cord into the charger and
the male end into the wall outlet.
Bracket
2. Installing the Charger
5