beautypg.com

Add a specific function to your remote control, Reset your remote control to its original presets, Instructions for use – Philips SBC RU 510 User Manual

Page 5

background image

3

Press key 1 and count the number of times the green LED
flashes. This is the first digit of the 4-digit code. (No
flashes means the digit is zero.)

4

Press key 2 and count the number of flashes for the second
digit.

5

Press key 3 and count the number of flashes for the third
digit.

6

Press key 4 and count the number of flashes for the forth
digit.

7

Note the code.

Add a specific function to your remote control

In case you do not find the function you want to use (e.g. a
specific teletext function), it can easily be added to your
remote control’s functionality. All you have to do is contact
the Philips Universal Remote Control helpline to obtain the
3-digit code for the missing function. The rest of the
procedure is quite simple:

1

Press and hold keys 1 and 6 simultaneously - for about
three seconds - until the green LED lights up.

2

Enter 9, 9 and 4, using the number keys.

3

Enter the 3-digit code you received from the helpline
using the number keys, within 30 seconds.

4

Press the key under which you want to store the new
function. The LED flashes twice to indicate a succesfull
installation.
If you want to store the function under a Shift/Key
combination; first press Shift, then press the required
function key.

N

O T E

- The original function of the key will be overwritten. If you

want to return to its original function see the following section
about resetting.

- Remember: no functions can be performed by this remote

control that are not present on the equipment you are
operating!

Reset your remote control to its original
presets:

If you want to return to the original functions of all keys and
delete all added functions under programmed keys a simple
reset procedure is sufficient:

1

Press and hold keys 1 and 6 simultaneously - for about
three seconds - until the green LED lights up.

2

Enter 9, 8 and 1, using the number keys.

- The LED flashes twice to indicate a succesfull reset.

The keys on your remote control will now perform their
default functions.

Instructions for use

5

English

1

2

3

4

1

6

9

-

0

9

9

4

SHIFT

1

6

9

8

1

This manual is related to the following products: