The initial setup menu 08, Display, Remote control – Pioneer DVR-233-S User Manual

Page 48: Setup navigator

The Initial Setup menu

•

Select ‘OSD Language’ then use the

buttons to select a language option.

Display

• Default setting:

You can have the recorder show or hide on-screen
operation displays (for Play, Stop, etc.), and choose
whether to switch the front panel display on or off when
the recorder is in standby.

Remote Control

• Default setting:

Recorder1

You only need to set this if you are using more than one
Pioneer DVD recorder in the same room.

So that each remote control operates only its own
recorder, make this setting different for each recorder
and remote in the room.

There are three different recorder IDs. When set to

Recorder2

Recorder3

, the remote control mode is

shown in the front panel display.

After selecting a new recorder ID, you have to confirm the
change by selecting

Yes

(use the

buttons),

then pressing

ENTER

Note that as soon as you change the recorder ID, the
remote becomes inoperative until you change the remote
to the same ID.

To set the remote, press and hold

RETURN

and a number

button (

) for five seconds.

Setup Navigator

• Default setting:

n/a

The Setup Navigator appears automatically when you
switch on the recorder for the first time (or after resetting
the recorder). It is also available from the Initial Settings
menu should you need it at any other time.