Pioneer DVR-233-S - Manual (Page 37)

Recording 06
37
En
English
5 To exit the timer recording screen, press HOME
MENU.
• If you change the Auto Channel Setting (from cable
to antenna or the other way around), existing timer
programs will be erased.
Timer recording using the VCR Plus+
®
programming system
This system makes programming timer recordings very
simple. Most TV guides publish PlusCode numbers with
their program details. If you want to make a timer
recording of a program, you just input the corresponding
code. The date, start, stop and channel settings are made
automatically. All you have to do is tell the recorder the
recording mode, and whether it’s a once-only recording
or a regular recording.
1 Press ‘VCR Plus+’ to display the VCR Plus+
program screen.
You can also access this screen from the Home Menu
(press
HOME MENU , select Timer Recording , then VCR
Plus+ ).
2 Use the number buttons to enter a PlusCode
number, then press ENTER.
To clear the last digit entered, press CLEAR .
3 If you want to change the recording quality, use
the / buttons to highlight Rec Mode, then use
the / buttons to change.
• See also Recording time and picture quality on
page 33 and Setting the picture quality/recording time
on page 34.
4 After making the settings, press ENTER.
• If you haven’t set up the guide channels (or at least
the guide channel for the PlusCode number that you
entered), the recorder will prompt you to enter the
channel number that the TV program is showing on.
Tip
• You can check the timer program settings by
pressing TIMER REC to display the timer recording
screen.
Extending a timer recording in progress
You can extend a timer recording beyond the
programmed end time in two different ways. This can be
useful if a broadcast program overruns, for example.
Moving the end time by 30-minute blocks
1 During timer recording, press and hold ì REC for
three seconds.
The timer indicator disappears from the front panel
display.
VCR
Plus+
1 2 3
4 5 6
7 8 9 0
CLEAR
ENTER
HOME
MENU
VCR Plus+
PlusCode# 3 9 9 2 4
(0) - (9) to input
Timer Rec (View)
Date Start
: AM AM 12/12 SUN 07 00
Stop CH
: 08 00 002
RecMode
SP
Program Set
ì REC TIMER REC
ENTER
HOME
MENU
DVR-230_KU.book Page 37 Thursday, January 27, 2005 2:42 PM