Philips AZ1840 - Manual (Page 9)

MP3/WMA/CD Player
Programming track
numbers
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the stop position, press
∞ or § to select
your desired track number.
For MP3-CD:
first press ALBUM +/- once
or more to find your album.
2 Press PROG.
➜ Display shows the number for program
location. (See 5).
3 Repeat steps 1-2 to select and store all
desired tracks.
• Display: if you try to program more
than 20 tracks.
Erasing a programme
You can erase the contents of the memory by :
• opening the CD door;
• selecting TUNER, MP3 LINK or USB
sound sources;
• pressing
9 twice during playback or once in
the stop position.
➜ PROG disappears.
Different play modes:
REPEAT. and SHUFFLE
(See
6, 7)
You can select and change the various play
modes before or during playback, and
combine REPEAT modes with PROG (PRO-
GRAM).
– plays the current track continuously.
– repeats the entire CD/program.
– plays all tracks in random order.
1 To select play mode, press the REPEAT or
SHUFFLE
buttons on the system (or
MODE on the remote control once or
more).
➜ The display shows the related icon.
2 Press
2; to start playback if in the stop/pause
position.
3 To return to normal playback, press the
REPEAT
or SHUFFLE buttons on the sys-
tem (or MODE on the remote control)
repeatedly until the modes are no longer dis-
played.
– You can also press
9 to cancel your play
mode.
AZ1840_12_CCR_Eng 7/24/08 17:46 Page 9