Passive arming – Python 1090 User Manual
Page 23
© 2006 directed electronics—all rights reserved
➜
passive arming
This alarm can be programmed to arm automatically thirty seconds
after exiting the vehicle. The following steps will start the passive
arming operation.
•
Turn the ignition off, exit the vehicle and close all protected
entries (doors, hood and trunk).
•
The led will flash rapidly to indicate the alarm will arm
shortly.
“
system
” After twenty seconds the siren will chirp once. Ten seconds
later the lights will flash when the alarm is armed.
“
remote
” The remote control will beep once, play the arm anima-
tion, and then display the status icons.
note:
Passive arming will not start until all protected
entries (doors, hood and trunk) are closed. If one is
opened after passive arming begins, passive arming
will stop, and then restart once it has been closed.
.
how your vehicle is protected when armed:
This alarm includes many layers of protection against theft��
Theseincludevisualdeterrent,exteriorprotection,entrypoint
protectionandengineimmobilization��
Thevisiblestatusledwarnsthievesthatthevehicleisprotected