Precor S3.23 - Manual (Page 8)

S3.23 Assembly and Maintenance Guide
page 8
1 2 3 4 5 6
Main Uprights
4 - 2 ¹⁄₂" bolts
8 - washers
4 - locknuts B
Step 1. Assemble Main Structure
1. Assemble Main Structur Assemble Main Structur Assemble Main Structur Assemble Main Structur Assemble Main Structure e e e e
A. Lift and stabilize the two Main Uprights.
B. Have an assistant hold the Main Uprights steady
while you attach the Mid Cross Brace using
four
2¹⁄₂-inch hex head bolts
eight washers
four locknuts
Note: Alternately finger tighten all four fasteners
while adjusting the alignment of the Main Uprights.
C. Attach the Chin-up Bar to the Main Uprights
using
four
³⁄₄-inch hex head bolts
four washers
CAUTION: Make sure that the assembled parts
are stable and balanced before your assistant
lets go of the Main Uprights.
D. Use two ⁹⁄₁₆-inch wrenches to tighten the fasteners
beginning with the Mid Cross Brace.
E. Wrench tighten the Chin-up Bar fasteners.
F. Set aside the accessories and handles found in
Box 1.
Mid Cross Brace
Attach Mid
Cross Brace
4 - ³⁄₄" bolts
4 - washers C
Mid Cross
Brace
Rear view
D
E
Tighten four Mid
Cross Brace
fasteners.
Tighten four
Chin-up Bar
fasteners.