Precor S3.23 - Manual (Page 17)

S3.23 Assembly and Maintenance Guide
page 17
1 2 3 4 5 6
4
Adjustments and
Maintenance
Adjustments and Maintenance
When the S3.23 is completely assembled, you need to
check the cables for proper tension. Obvious signs that
cable problems exist include:
✔ Top Cap Weight does not rest squarely on the top
weight of the Weight Stack.
✔ Cable rubs the inside edges of the pulleys.
✔ Excess slack exists in the cable.
✔ Weight Pin cannot be easily inserted in or
removed from each hole in the Weight Stack.
CAUTION: Take the time to perform the following
steps. If the cables do not have the proper tension
you could void the Precor Limited Warranty.
If you experience any of these cable problems, place
the Weight Pin in the Top Cap Weight to ensure the
least cable resistance and then make the proper cable
adjustments.
Top Cap Weight
Weight pin
A slack cable Pulley
Weight Stack
Holes in Weight Stack