Premier Mounts PSM-442F - Manual (Page 6)

6
A Plasma display
B PSM-Mount
C PSM-Hardware
(See chart on pg 5)
D M10 x 12 (mm) Hex
screws, flat washers
(4,4,8 Pack)
E PSB-UWFB Universal flat
mount
F M6 Security screws used
on tilt, ceiling, cart, floor
stand applications.
G PSB-TBP Universal tilt
mount
H AST-2446 adjustable
suspension post for single
display mounting or
AST-2446/2 adjustable
suspension post for dual
display mounting.
I PSD-S Single mounting
adapter
J PSD-D Dual mounting
adapter
K 1½" (NTP) For single
ceiling display installations
or 2" (NTP) For dual
ceiling installations
AST-2446: 1½" (Adjustable height suspension adapter) - Offering height adjustment in 1¼" increments, between 24" and 46"
(12" - 24", if you cut down), this suspension adapter mates with the single display swivel adapter and 1½" (NTP) pipe.
AST-2446/2: 2" (Heavy-duty adjustable height suspension adapter) - Offering height adjustment in 1¼" increments, between 24" and 46"
(12" - 24", if you cut down), this suspension adapter mates with the dual display swivel adapter and 2" (NTP) pipe.
PSD-S: 1½" (Single display swivel adapter) – This adapter could be mated with any two of out ultra slim flat or tilt plasma mounts to allow 360° swivel for a
ceiling installation. It works with 1½" threaded (NTP) pipe or AST-2446.
PSD-D: 2" (Dual display swivel adapter) - This adapter could be mated with any two of out ultra slim flat or tilt plasma mounts to allow 360° swivel for a ceiling
installation of two back to back displays. It works with 2" threaded (NTP) pipe or AST-2446/2.
PSD-PVW1: 1½" (Single display pole adapter) – Attach this adapter directly to any of the flat or tilt plasma mounts, and slide it over a 2" scheduled 40 steel
pipe, then secure at any height with two (2) tension-locked bolts.
PSD-PVW2: 2" (Dual display pole adapter) – Attach any two (2) of the flat or tilt plasma mounts back to back with this adapter, and slide it over a 2" scheduled
40 steel pipe, then secure at any height with two (2) tension-locked bolts.
(Optional) ceiling adapters
Ceiling installation
assembly
EXAMPLE PLASMA FOR ILLUSTRATION PURPOSES ONLY
Horizontal to vertical mounting
Note: The M6 x 12 (mm) Security screws
must always be used for extra security.
Horizontal to vertical mounting
Note: The M6 x 12 (mm) Security screws
could be used for additional safety.