Runtime check, Runtime reset – Python 991 User Manual
Page 31

31
© 2008 Directed Electronics. All rights reserved.
still enabled).
You can still remote start the vehicle after the turbo timer has timed out
and shut off the vehicle. For safety reasons, if a door is opened or if the
ALARM
Note: An optional push button can be hard wired to the (-) activation
INPUT
When the vehicle is running follow the procedures listed above, but
instead of pressing the remote, press the push button the appropriate
number of times to activate the remote start (factory setting is for 1
pulse). The remote emits the remote start confirmation tone, after which
YOU
Runtime check
Command
:
While the remote start is running, press
two-times,
and then Hold for 1.5 seconds.
Feedback
:
Notes
:
This feature is only available on the 2way remote.
Runtime reset
Command
:
While the remote start is running, press
one-time and
then
.
Feedback
:
Remote start ON tones.
Notes
:
Re-starts the remote start runtime counter if remote start
is active. Note: If remote start is not active, the 2-WAY