Timer mode – Python 991 User Manual
Page 29

29
© 2008 Directed Electronics. All rights reserved.
running. If the vehicle shuts down when locking, then the unit did not
enter valet take-over mode.
Timer mode
Command
:
Press
two-times and then
.
Feedback
:
The vehicle will confirm with 4 fast parking light flash-
es.
Notes
:
Enables or disables the remote start timer mode.
The system must be armed for the timer mode to operate. The system
WILL
Important:
Use Timer Mode in open areas only. Never start
and run the vehicle in an enclosed space such as a garage
or carport.
To activate timer mode with a manual transmission:
Enter the MTS mode.
1.
%XIT
2.
Enter the timer mode. The parking lights quickly flash 4 times to confirm
3.
ENTRY
To exit timer mode with transmitter:
Press
s
twice and then press
. Parking lights flash slowly four times
CONlRMING
To exit timer mode without transmitter:
Make sure the remote start system is not operating the engine.
1.