Philips Norelco 7737X User Manual
Page 20
brush supplied after every use.
The Trimmer can also be cleaned by rinsing it
under the tap.
C
2
Lubricate Trimmer teeth twice a year with
Norelco Razor Lubricant, model AL80, or
one drop of mineral oil.
Every Two Months: Razor Heads
IMPORTANT: Do Not mix up the cutters
and combs as the shaving performance may be
adversely affected for several weeks before
optimal shaving performance is restored.
1
Switch razor OFF.
C
2
Press the Razor Head Release Button
located under razor heads on front side of
Razor.
C
3
Remove the Razor Head Assembly and
clean the razor heads and hair chamber by
running under hot water. Be sure water is
not too hot so as to cause burns or
scalding.
C
4
While holding Razor Head Assembly in
one hand, turn center wheel
counterclockwise to release and remove
frame. Set frame aside.
ENGLISH
21
2
1
1
2
7737X DFU 12/12/03 9:15 AM Page 21 (Black plate)