Philips Norelco 7737X - Manual (Page 11)

ENGLISH
12
Charging the razor
1 Connect the small plug into the charging
stand and put the power plug into any
100V to 240V AC outlet. Use only the
cord and stand provided.
C
2 Place the razor in the charging stand. The
razor automatically switches off when
placed in the charging stand.
3 Remove the power plug from outlet as
soon as the battery is fully charged. You
may then store the razor in the charging
stand.
Recharging
◗ First time charging and recharging after non-use
for 1 month or more requires a full 8 hours.
◗ A fully charged razor has cordless shaving time
of up to approx. 55 minutes.
◗ Return razor to charging stand after shaving.
◗ Red recharging indicator light will blink when
batteries are almost empty.
◗ Remove the power plug from outlet as soon as
the battery is fully charged. You may then store
the razor in the charging stand.
Inserting the First Cartridge
◗ One connector is supplied for use with all four
cartridges. Do not throw connector away
when you replace an empty cartridge.
7737X DFU 12/12/03 9:15 AM Page 12 (Black plate)