Hyundai H-CMD4013B - Manual (Page 15)

15
- Press and hold AMS button on the panel, on the RC or on the touchable screen. The stations with good
reception are stored automatically.
Note: If you store a station in a preset memory, which already has a station, the current station will be cleared
and replaced with the new one.
To recall a station:
- Select a band (if needed)
- Press a number button (1-6) on the RC or the correspondent station number on the touchable screen to
recall a stored station.
Or:
- Select a band (if needed)
- Press REW/FWD buttons on the RC to select the stored station.
Preset scan function
Press AMS button on the panel, on the RC or on the touchable screen to scan all preset stations in the memory
of the current band and stay on each memory stations for several seconds. To stop preset scan, press this button
again.
Stereo/Mono reception
In FM band press ST/AUDIO button on the RC to select Stereo or Mono reception mode.
Local/Distant reception mode
Press LOC/SUB-T button on the RC or LOC button on the touchable screen to turn the LOCAL function ON or
OFF. When the LOCAL function is on the local stations (stations with strong radio signal) can be played. When
the LOCAL function is off both local and distant stations (stations with weak radio signal) can be played. Press
the button again to turn it of.