Planar PR6020 - Manual (Page 14)

2
English
Setting Up
Adjusting the Projected Image
Adjusting the Projector Image Height
Tilt Adjusting Foot Elevator Foot Elevator Button
The projector is equipped with elevator foot for adjusting the
image height.
To raise the image:
1. Press the elevator button  .
2. Raise the image to the desired height angle  , then release
the button to lock the elevator foot into position.
3. Use screw in feet  to fine-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the eleva-
tor foot into position.
3. Use screw in feet  to fine-tune the display angle.
1
2 3